IMV K-series

High-Excitation Force Water-Cooled Range

High-excitation force and silent water-cooled system for improving your test environment

K-series, the high-excitation force water-cooled vibration-simulating test systems fully developed by IMV.
Advanced performance from the K-series will significantly improve your test environment.

Request
A Quote
Most Quotes sent in 3-4 hours

QUESTIONS?
ASK OUR EXPERTS
Contact your local W5 Representative

Product Details

IMV-Smart^TM technology

■ Silent system design: The water-cooling system produces neither the intake nor exhaust sounds that an air-cooling system does.
■ Record of significant accomplishments: IMV has developed the most advanced water-cooled system.

System Model				Unit	K080/EM10HAM	K125A/EM18HAM	K125LS/EM20HAM	K200/EM24HAM	K350/EM36HAM
System Specifications	Frequency Range			Hz	0－2500	0－2500	0－2000	0－2000	0－2000
	Rated Force	Sine		lbf	18,000	28,100	28,100	45,000	78,700
		Random		lbf rms	18,000	28,100	28,100	45,000	70,800
		Shock		lbf	36,000	56,200	56,200	90,000	157,300
	Maximum Acc.	Sine		g	102	102	102	102	102
		Random		g rms	71	71	71	71	71
		Shock		g peak	204	204	204	204	204
	Maximum Vel.	Sine		in/s	79	79	79	79	79
	Maximum Vel.	Shock		in/s peak	79	79	79	94	138
	Maximum Disp. (Sine)			inp-p	2.0	2.0	4.0	3.0	3.4
	Maximum Travel			inp-p	2.3	2.4	5.2	3.4	3.7
	Maximum Load			lbs	2,200	4,400	4,400	4,400	6,615
	Power Requirements			kVA	100.0	170	190	300	325
	Breaker Capacity			A	150	250	300	500	630 (total)
Vibration Generator	Model				K080	K125A	K125LS	K200	K350
	Armature Mass			lbs	132	177	221	441	772
	Armature Diameter			φin	17.6	22	22.0	25.6	29.9
	Allowable Eccentric Moment			lbf in	13,700	21,700	21,700	43,400	43,400
	Dimensions	Width		in	63	70	78	97	119
		Height		in	48	54	61	75	91
		Depth		in	41	51	54	69	82
	Shaker Body Diameter			φin	39	43	43	50	64
	Mass			lbs	11,025	15,435	17,640	35,280	92,595
Power Amplifier	Model				EM10HAM-K80	EM18HAM-K125A	EM20HAM-K125LS	EM24HAM-K200	EM36HAM-K350
	Maximum Output			ｋVA	100	124	155	320	400
	Amplifier Bay			s	2	3	3	5	7
	Dimensions	Width		in	46	69	69	114	161
		Height		in	77	77	77	77	77
		Depth		in	34	34	34	34	34
	Mass			lbs	3,310	5,730	7,275	11,020	12,015
Controller	Vibration Controller				See Vibration Controller K2	See Vibration Controller K2	See Vibration Controller K2	See Vibration Controller K2	See Vibration Controller K2
Cooling	Cooling Method				Shaker: Water Cooling Amp: Air Cooling	Shaker: Water Cooling Amp: Air Cooling	Shaker: Water Cooling Amp: Air Cooling	Shaker: Water Cooling Amp: Air Cooling	Shaker: Water Cooling Amp: Air Cooling
	Required Cooling Water Flow Rate	Δt = 5°C		gal/min	103	103	103	172	182
	Required Cooling Water Flow Rate	Δt = 10°C		gal/min	25	39	39	60	66
	Heat Exchanger	Dimensions	Width	in	23	23	23	41	47
			Height	in	67	67	67	75	77
			Depth	in	34	34	34	32	55
		Mass		lbs	885	885	885	1,325	1,325

* Random force ratings are specified in accordance with ISO5344 conditions. Please contact IMV or your local distributor with specific test requirements.
* Power supply: 3-phase 220/480V, 60Hz. A transformer is required for other supply voltages.
* If the tests (Sweep or Spot) include high velocity, the maximum velocity value should be reduced to 5.5 in/s.
* Breaker capacity for 480V.
* Bypass circuit is needed. Please contact IMV or your local distributor for further information.
* An export license is required for exporting a shaker system of over 11,240 lbf sine force.
* For random vibration tests, please set the test definition of the peak value of acceleration waveform to operate at less than the maximum acceleration of shock.
* Frequency range values vary according to sensor and vibration controller.
* Armature mass and acceleration may change when a chamber is added.
* Mass and dimensions may change for CE-marked systems.