


Need Real Answers for your Specific Use Case? Talk to our Engineers
BST 27C: Triaxial Crash Accelerometer (Screw Mount)
Bay SensorTec GmbH
Generating/Updating Your Configure-to-Order tool...
1
The W5 Engineering Advantage
20+ Years in Testing
All Across North America
Trusted by Industry Leaders
24-Hour Engineering Replies
Secure Order Processing
ISO-Level Quality Assurance
The model BST 27C is a triaxial accelerometer based on piezo resistive technology. A four-active arm Wheatstone-Bridge (4 wire system) configuration and a selectable damping ratio helps to connect the sensor on all data acquisition systems. The light weight and small size of the sensor makes it easy to mount it on difficult places at the car for a crash test or flatter test application.
The sensor has 6 m very high rugged and flexible 4-wire per axe cable. This makes it easy to place it on difficult places fixed with two screws M2.5. As an option, we supply the sensor with a Dallas ID and a Shunt resistor in the connector if possible. A calibration for the sensor is obligatory.
Features
Meets SAE J211 spec.
DC MEMS PR Accelerometer
High Shock
Aluminium Housing, anodized
Low Mass
Calibration
Application
Some of the use cases for the BST 27C Triaxial include:
At a Glance
Best for: Gas-damped three-axis crash and shock tests needing a two-screw mount
Range: 500, 1,000 or 2,000 g; to 4,000 Hz; 10,000 g shock limit
Size & mount: 0.85 × 0.57 × 0.71 in (21.5 × 14.5 × 18.0 mm), 0.60 oz (17 g), 2 × M2.5
Environment: IP64, −40 to 212 °F (−40 to 100 °C), gas damping, SAE J211
Which BST 27C Triaxial range do I need?
Parameter | 500 g | 1,000 g | 2,000 g |
|---|---|---|---|
Range | ±500 g | ±1,000 g | ±2,000 g |
Sensitivity (typ.) | 0.04 mV/g | 0.018 mV/g | 0.016 mV/g |
Frequency response | 2,750 Hz | 3,500 Hz | 4,000 Hz |
Resonance frequency | >13 kHz | >20 kHz | >23 kHz |
Shock limit | 6,000 g | 8,000 g | 10,000 g |
BST 27C Triaxial FAQ
Three ranges: 500 g, 1,000 g, and 2,000 g.
3 to 10 VDC constant.
−40 °F to 212 °F (−40 °C to 100 °C).
Additional cable length, connector, Dallas ID, shunt resistor, and DAkkS DIN EN ISO/IEC 17025:2018 calibration.
BST 27C: Triaxial Crash Accelerometer (Screw Mount)
Bay SensorTec GmbH
Generating/Updating Your Configure-to-Order tool...
1

