Optris CSlaser LT — Single-piece Two-wire Pyrometer with Double Laser, −22 °F to 1,832 °F
What it is
The Optris CSlaser LT is a single-piece infrared thermometer for fixed-installed or fixed-mounted applications, measuring −22 °F to 1,832 °F (−30 °C to 1,000 °C) with spots from 0.06 in (1.4 mm) and 150 ms response. Double laser spot marking, a stainless steel M48x1.5 housing and 50:1 optics give precise readings even in narrow fields of view, and the standard two-wire 4 to 20 mA interface connects straight to a PLC.
At a Glance
Range: −22 °F to 1,832 °F (−30 °C to 1,000 °C), 8 to 14 µm spectral range
Optics: 50:1 with double laser sighting; spots from 0.06 in (1.4 mm)
Speed: 150 ms response time, ±1% or ±1.8 °F (±1 °C) accuracy
Inaccessible or moving products: non-contact measurement
Industrial and R&D: small measurement spots
Key features
Analog and digital modes: 4 to 20 mA plus alarm, or digital via USB with bidirectional and burst modes, also simultaneously
Multiple close-focus versions: for different working distances
Software: license-free Compact Connect for temperature-time diagrams, logging, process control and parameterization, plus the IRmobile Android app
Made in Germany: designed, manufactured and calibrated to PTB or NIST traceable standards
Why engineers pick it
Simple. One housing, two wires.
Precise. Double laser and 50:1.
Rugged. Stainless steel, 185 °F ambient.
CSlaser LT FAQ
Use the Optris CS USB connection kit (ACCSMIACC) with the Compact Connect software.
Yes, with the optional USB programming kit: connect each wire of the USB adapter cable to the same-colored sensor wire using the terminal block. The sensor supports bidirectional communication and a unidirectional fast burst mode in which it only sends data.
Yes, as an additional alarm output.
Yes. The sensor connects directly to an Android smartphone or tablet running the IRmobile app, which monitors and analyzes measurements; the phone powers the pyrometer.
The object size and optical resolution determine the maximum distance. The object should fill the optics' field of view, so the spot (90% energy) should be the same size as the object or smaller.
The integrated double laser marks the measuring spot, which lies between the two laser points. At the focus point of the optics both lasers cross and merge into one dot, marking the minimum spot. The laser points are for orientation only.
It is a class 2 laser with less than 1 mW in the 500 to 650 nm range per EN 60825-1:2014. Do not point it at people's or animals' eyes, do not stare into the beam, and avoid indirect exposure via reflective surfaces.
Yes, at ambient temperatures above 122 °F (50 °C). Use the laser only for sighting and positioning; permanent use shortens laser diode life and can heat the sensor.
Yes. The laser supply line must run through a switch or pushbutton installed no more than 6.6 ft (2 m) from the sensor; the laser can also be switched via the software.
The connector version of the sensor.
Yes. Run a separate instance of Compact Connect (or CompactPlus Connect) for each pyrometer and connect both via USB, or connect them on RS485 using the RS485-USB adapter.
Configuring and scaling
Select the options on this page and add to cart, or contact W5 for a quote on custom configurations. Ask W5 about the USB connection kit, cooling housings, air purge and mounting accessories.
Scope of supply
CSlaser LT with 9.8 ft (3 m) cable, mounting nut, mounting bracket and CSlaser manual; connection cable optional.
Get the CSlaser LT specified and supplied
W5 Engineering supplies Optris infrared temperature measurement products. We match the CSlaser LT optics to your target and PLC. Contact us with your process temperature and measurement distance and we will return a configuration recommendation and quote.