Main Image
Main Image
Talk to our Engineers

Need Real Answers for your Specific Use Case? Talk to our Engineers

No sales scripts. Just technical feasibility:

Call us at 1-866-400-1300

or

E-mail

Piezoelectric load cells for very low forces, force transducers, Fz ±0,5 N to ±500 N / PE Low Force Sensor

Kistler Aero/Defense (T&M)

Generating/Updating Your Configure-to-Order tool...

See product documents

1

The W5 Engineering Advantage

Icon for award

20+ Years in Testing

Icon for users

All Across North America

Icon for trust

Trusted by Industry Leaders

Icon for clock

24-Hour Engineering Replies

Icon for users

Secure Order Processing

Icon for Award

ISO-Level Quality Assurance

Overview
Specifications
Resources

What it is

These slim piezoelectric force transducers are designed for measuring dynamic and quasistatic tensile and compression forces.

The Kistler 9215A is a slim, pen-shaped piezoelectric force sensor for dynamic and quasistatic forces from −4.5 to 45 lbf (−20 to 200 N). Its threshold is below 0.5 mN, it weighs 0.088 oz (2.5 g), and its natural frequency is above 50 kHz. It is calibrated in three ranges for switch, spring, and contact-force measurement in tight spaces.

  • Measuring range: −4.5 … 45 lbf (−20 … 200 N), compression and tension
  • Three calibrated ranges: 0 … 45 lbf, 0 … 4.5 lbf, and 0 … 0.45 lbf (0 … 200 N, 0 … 20 N, 0 … 2 N)
  • Threshold: <0.5 mN
  • Sensitivity: −423 pC/lbf (−95 pC/N)
  • Natural frequency: >50 kHz, with rigidity of ≈571,000 lbf/in (≈100 N/µm)
  • Slim build: 0.917 in (23.3 mm) long, M5x0.5 mounting thread, M4x0.35 connector
  • Sealed housing: IP65 with connected cable, operating from −58 to 356 °F (−50 to 180 °C)

What it is used for

Some of the use cases for the 9215A include:

  • Contact measurement — actuation force on keys, switches, and relays
  • Spring characteristics — force-versus-travel curves on small springs
  • Pull-out forces — extraction force on plug contacts
  • Miniature measuring platforms — highly sensitive multi-sensor fixtures
  • Assembly and handling — force measurement on installation machines, robots, and micromanipulators

Main features / advantages

Preloaded force transducers, ready to measure immediately

Calibrated load cells for tensile and compression forces from 1 mN

Three calibrated measuring ranges

Highest sensitivity with extremely low response threshold

Ideal for confined spaces thanks to slim geometry

Easy installation due to standard metric threads

What does the 9215A measure?

The 9215A measures axial force (Fz) applied to its front face, in tension and compression. The piezoelectric element generates a charge proportional to force, which a downstream charge amplifier, such as the ICAM Type 5073A, or a process monitoring system, such as maXYmos Type 5867B/5877A, converts into a process signal or force curve (for example 0 … 10 V).

The sensors have a sealed housing and are designed for use in industry and the laboratory. Installation directly into the structure is made possible by the thread on the shaft, and force is applied to the front face. The sensors are based on the piezoelectric measurement principle: the force acting on the highly sensitive transversal measuring element generates a proportional charge at the signal output. The slim, pen-like shape of the sensor body and the force application on the axial tapped hole are important features of these sensors. As a result of the high sensitivity of the integrated measuring element and special constructive measures during force application, the threshold is less than one millinewton.

Measurement taskWhy the 9215A fits
Low-force contact and actuationThreshold below 0.5 mN resolves the small forces of keys, switches, and relay contacts
Fast force eventsNatural frequency above 50 kHz and rigidity of ≈100 N/µm capture short force transients without the sensor softening the load path
Closely spaced measuring pointsThe slim, pen-shaped body lets several sensors measure objects placed close together
Mixed parts at one stationOne sensor covers a 100:1 span of calibrated ranges, from 0 … 2 N up to 0 … 200 N

Why engineers pick it

  • One sensor, three calibrated ranges. The 9215A is calibrated at 0 … 200 N, 0 … 20 N, and 0 … 2 N. Switching range on a charge amplifier such as the ICAM Type 5073A lets one measuring station handle very different parts without a sensor change.
  • Overload headroom in the low ranges. Overload is rated at 300 N. Measuring in the 0 … 2 N range leaves 150 times the full-scale force before the overload limit, removing the need for costly protective measures.
  • Sub-millinewton threshold. The threshold is below 0.0005 N (0.5 mN), with linearity of ±1 %FSO and hysteresis of ≤1 %FSO in the calibrated ranges.
  • Small and stiff. At 2.5 g and ≈100 N/µm rigidity, the 9215A adds almost no mass or compliance to the structure, which keeps the natural frequency above 50 kHz.

How is the 9215A mounted?

The 9215A installs directly into the structure through the M5x0.5 thread on its shaft, tightened to a maximum of 2 N·m (17.7 lbf·in). Force is applied to the front face through an M2 tapped hole, tightened to a maximum of 0.2 N·m (1.77 lbf·in).

  • Force introducing cap: Art. No. 3.220.217, included in delivery, applies force evenly to the front face
  • Coupling element: Type 9405A1 couples the sensor into a mounting plate for force application
  • Side load and moments: keep side load under 90 N (20.2 lbf), bending moment under 0.5 N·m (4.43 lbf·in), and torque under 1.0 N·m (8.85 lbf·in)

When is the 9215A the wrong choice?

  • It has no mechanical overload stop. The 9215A is a very sensitive instrument with no mechanical fuse against overload. If forces above 300 N compression or 30 N tension are possible, add protection in the fixture.
  • Calibration covers compression only. The measuring range runs from −20 N in tension to 200 N in compression, but the three calibrated ranges are all specified in compression (0 … 200 N, 0 … 20 N, 0 … 2 N).
  • Long static measurements. As a piezoelectric sensor, the 9215A is specified for dynamic and quasistatic forces. It is not intended for holding a constant load over long periods.
  • Side loads matter. Side load sensitivity is up to ±0.05 N/N and bending moment sensitivity up to ±20 N/N·m. Fixtures should keep the force axial.

9215A FAQ

−20 to 200 N (−4.5 to 45 lbf). Overload is rated at −30/300 N.

The threshold is below 0.0005 N (0.5 mN).

Three: 0 … 200 N, 0 … 20 N, and 0 … 2 N. Linearity is ±1 %FSO across the calibrated ranges.

A charge amplifier such as the ICAM Type 5073A, or a process monitoring system such as maXYmos Type 5867B/5877A. These convert the sensor's charge output into a signal such as 0 … 10 V.

An M4x0.35 pos. – BNC pos. cable: Type 1651C in 1, 2, 5, or 10 m, or the highly flexible Type 1900A23A22xx in 1, 2, 3, 5, or 10 m.

Not mechanically. It has no overload fuse, so the fixture must keep forces within −30/300 N.

−50 to 180 °C (−58 to 356 °F).

The sensor and the force introducing cap, Art. No. 3.220.217.

Configuring and scaling

The 9215A is a single model. What changes between installations is the cable and the signal chain:

  • Standard cable, M4x0.35 pos. – BNC pos.: Type 1651C1 (1 m), 1651C2 (2 m), 1651C5 (5 m), 1651C10 (10 m)
  • Highly flexible cable, M4x0.35 pos. – BNC pos.: Type 1900A23A2201 (1 m), 1900A23A2202 (2 m), 1900A23A2203 (3 m), 1900A23A2205 (5 m), 1900A23A2210 (10 m)
  • Coupling element: Type 9405A1
  • Maintenance: cleaning and insulation spray Type 1003 (250 ml) and insulation testing device Type 5493

Configure and order the 9215A

Buy the 9215A and its accessories directly on this page. If you need the charge amplifier or process monitoring system matched to your range and part mix, or several sensors set up for a multi-point fixture, contact us and we'll work through it with you.